Actes du colloque - Volume 4 - page 516

3174
Proceedings of the 18
th
International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013
improvement and foundation engineering. The focus of these
studies is mostly on the environmental and economic aspects. It
is recommended that a more holistic approach considering
environmental, social, economic, reliability and resilience
aspects (the 4 E’s) should be developed for sustainable
geotechnical practices.
7 REFERENCES
Anderson, S., Chapman, T. and Fleming, J. (2006). “Case history: the
redevelopment of 13Fitzroy Street, London.” Proc. of International
Conference on Reuse of foundations for urban sites, Butcher, A. P.,
Powell, J.J.M., Skinner, H.D (eds.) 311-320.
Basu, D. and Salgado, R. (2012). “Load and resistance factor design of
drilled shaft in sand.” Journal of Geotechnical and Geoenvironmental
Engineering, 138, 12.
Brandl, H. (2006). “Energy foundations and other thermo-active ground
structures.” Geotechnique 56(2), 81-122.
Butcher, A. P., Powell J.J.M. and Skinner, H.D. (2006b). ”Stonebridge
Park ─ a demolition case study”, Proc. of International Conference
on reuse of foundations for urban sites, Butcher A. P., Powell
J.J.M., Skinner H.D (eds.) 321-330.
Butcher, A. P., Powell, J.J.M., Skinner, H.D. (eds.) (2006a). “Whole life
cost and environment impact case studies”, Reuse of foundations for
urban sites: A best practice handbook, IHS BRE Press, Berkshire,
United Kingdom, 116-119.
Chan, P. and Tighe, S. (2010). “Quantifying Pavement Sustainability in
Economic and Environmental Perspective”, Transportation Research
Board 89
th
Annual Meeting, Washington, DVD.
Chau, C., Soga, K. and Nicholson, D. (2006). “Comparison of embodied
energy of four different retaining wall systems.” Proc. of
International Conference on reuse of foundations for urban sites,
Butcher, A. P., Powell, J.J.M., Skinner, H.D (eds,) 277-286.
Chittoori, B.S., Puppala, A.J., Reddy, R.K., Marshall, D. “Sustainable
Reutilization of Excavated Trench Material.” ASCE GeoCongress,
2012, Oakland, California, March 2012, 4280-4289.
Dixit, M.K., Fernandez-Solis, J.L., Lavy, S. and Culp, C.H. (2010).
“Identification of parameters for embodied energy measurement: A
literature review”, Energy and Buildings, 42, 1238-1247.
Doherty, P., Casey, B. and Gavin, K. (2010). “Laying Foundations for
Sustainable Energy”, The Engineers Journal, 64(6), 262-266.
Egan, D. and Slocombe, B.C. (2010). “Demonstrating environmental
benefits of ground improvement”, Proc. of the Institution of Civil
Engineers – Ground Improvement, 163(1), 63-70.
Gnanendran, C. T. and Woodburn, L. J. (2003). Recycled Aggregate for
Pavement Construction and the Influence of Stabilization.
Proceedings - Conference of the Australian Road Research Board,
21, 1755-1768.
Haldar, S. and Basu, D. (2011). “Beam on spatially random elastic
foundation.” In Proceedings of GeoRisk 2011, Atlanta, Georgia,
U.S.A., CD-ROM, June 2011, GSP 224.
Haldar, S. and Basu, D. (2012). “Response of strip foundation on
spatially random elastic foundation under variable column loads.” In
Proceedings of Geo-Congress 2012, Oakland, California, U.S.A.,
CD-ROM, March 2012.
Holt, D.G.A. (2011). “Sustainable Assessment for Geotechnical
Projects”, PhD. Thesis, University of Birmingham, U.K.
Holt, D.G.A., Jefferson, I., Braithwaite, P.A. and Chapman, D.N.
(2010). “Sustainable Geotechnical Design”, Proc. of Geocongress
2010, Florida, CD-ROM.
Iai, S. (2011). “Towards Global Sustainability”, Geotechnics and
Earthquake Geotechnics Towards Global Sustainability, Iai, S. (ed.),
Springer.
Inui, T., Chau, C., Soga, K., Nicholson, D. and O’Riordan, N. (2011).
“Embodied Energy and Gas Emissions of Retaining Wall
Structures”, Journal of Geotechnical and Geoenvironmental
Engineering, 137(10), 958-967.
Jefferis, S.A. (2008). “Moving towards Sustainability in Geotechnical
Engineering”, Proc. of the Geo Congress 2008, GSP 178, 844-851.
Jefferson, I., Hunt, D.V.L., Birchall, C.A. and Rogers, C.D.F. (2007).
“Sustainability Indicators for Environmental Geotechnics”, Proc. of
the Institute of Civil Engineers - Engineering Sustainability, 160(2),
57-78.
Kibert, C.J. (2008). Sustainable Construction, 2
nd
Edition, John
Wiley and Sons Inc., New Jersey.
Knuth, D. and Fortmann, J. (2010). “The Development of I
LAST™
Illinois
Livable and Sustainable Transportation”, Proc. of the Green
Streets and Highways 2010 Conference, ASCE.
Laloui, L. (2011). “In-situ testing of heat exchanger pile”, Proc. of
the GeoFrontiers 2011, Dallas, Texas, CD-ROM.
Lee, J., Edil T. B., Benson C. H., and Tinjum J. M. (2010). “USE of
BE
2
ST In
Highways for Green Highway Construction Rating in
Wisconsin”, Proc. of the Green Streets and Highways 2010 Conference,
ASCE.
McVoy, G. R., Nelson, D.A, Krekeler, P., Kolb, E., and Gritsavage,
J.S. (2010). “Moving towards Sustainability: New York State
Department of Transportation's GreenLITES Story”, Proc. of the
Green Streets and Highways 2010 Conference, ASCE.
Misra, A. and Basu, D. (2011). “A sustainable approach to foundation
design.” In Proceedings of 13
th
PanAmerican Conference on Soil
Mechanics and Geotechnical Engineering and 64
th
Canadian
Geotechnical Conference, Toronto, Canada, October 2011.
Misra, A. and Basu, D. (2012). “A quantitative sustainability indicator
system for pile foundations.” In Proceedings of Geo-Congress 2012,
Oakland, California, U.S.A., CD-ROM, March 2012.
Muench, T.S. and Anderson, J.L. (2009). “Greenroads: A Sustainability
Performance Metric for Roadway Design and Construction”,
.
Pittenger, D.M. (2011). “Evaluating Sustainability of Selected Airport
Pavement Treatments with Life-Cycle Cost, Raw Material
Consumption, and Greenroads Standards”, Journal of the
Transportation Research Board, No. 2206, 61-68.
Puppala, A. J., Saride, S., Potturi, A. and Hoyos, L.R. (2009). “Resilient
Behavior of Cement-Fiber Treated Reclaimed Asphalt Pavement
(RAP) Aggregates as Bases.” Proceedings of the International
Foundation Congress and Equipment Expo, ASCE, 2009, GSP 187,
433-440.
Quick, H., Meissner, S., Michael, J., Quick, H.D.and Arslan, U. (2005).
“Innovative foundation systems for high rise buildings.” Proc. of
the 1
st
Intelligent Building Middle East Conference, Bahrain.
Saride, S., Puppala, A. J., and Williammee, R (2010). Assessing
Recycled/Secondary Materials as Pavement Bases. Ground
Improvement 163, GI1, 3-12.
Spaulding, C., Massey, F. and LaBrozzi, J. (2008). “Ground
Improvement Technologies for a Sustainable World”, Proc. of the
Geo Congress 2008, GSP 178, 891-898.
Steedman, R.S. (2011). “Geotechnics and Society: Carbon, a New
Focus for Delivering Sustainable Geotechnical Engineering”,
Geotechnics and Earthquake Geotechnics Towards Global
Sustainability, Iai S. (ed.), Springer.
Storesund, R., Messe, J. and Kim, Y. (2008). “Life Cycle Impacts for
Concrete Retaining Walls vs. Bioengineered Slopes”, Proc. of the
Geo Congress 2008, GSP 178. 875-882.
Torres, V.N. and Gama, C.D. (2006). “Quantifying the Environmental
Sustainability in Underground Mining”, XV International
Symposium on Mine Planning & Equipment Select, Torino, Italy.
Yu, O-K, Medina-Cetina, Z. and Briaud, J-L (2011). “Towards an
Uncertainty-Based Design of Foundations for Onshore Oil and
Gas Environmentally Friendly Drilling (EFD) Systems.” Proc. of
the GeoFrontiers 2011, Dallas, Texas, CD-ROM.
1...,506,507,508,509,510,511,512,513,514,515 517,518,519,520,521,522,523,524,525,526,...822